Retreading is the process of applying a new tread on used tyre casings.
Regrooving is the practice of carving out the rubber in the grooves of a tyre to create additional tread depth.
Retreading and regrooving are used by truck owners and fleet managers everywhere because they reduce the fleet’s carbon footprint and help drive better value from the overall investment in tyres. But what goes into each process? Read our FAQs to find out.
Retreading is the process of applying a new tread on used tyre casings.
Regrooving is the practice of carving out the rubber in the grooves of a tyre to create additional tread depth.
The main reason for retreading is to reduce waste, thereby reducing the impact a business has on the environment. Increasingly, customers demand that their suppliers demonstrate best practices in sustainability, so retreading also reassures customers. Retreads also substantially reduce operating costs, delivering similar performance to new tyres but at a lower cost.
Tyres can be retreaded several times. Retreading the tyres depends on the activity of the fleet and the management model. If you want your tyres to have multiple life, consider the factors that influence wear:
These are two methods of retreading. The mold-cure process renews a casing from bead to bead. Unvulcanised rubber is applied to the buffed tyre and it is placed in a mould, exactly as it would be in the manufacture of new tyres. So the retread tyre looks exactly like a new tyre: only the naming on the sidewalls will indicate that the tire has been retreaded.
The pre-cure process (also known as ‘cold-cure’) involves applying a new pre-moulded, pre-vulcanised tread to the casing. It is bonded to the casing by means of a thin layer of specially compounded uncured rubber (known as cushion or bonding gum) which, when vulcanized, acts as an adhesive.
Goodyear tyres are retreaded under TreadMax and Next Tread brands.
Please directly contact us to get details on our pre-cure offer.
Like retreading, regrooving extends the life of the tyres, while reducing the costs.
Regroove Goodyear truck tyres when there is still enough tread depth. Under NO circumstances should the tyre be completely worn before regrooving. Suggested remaining tread depths are: 3-4 mm for regular highway use; 5-6 mm in operating conditions where penetration damage is likely.
The regrooving of truck tyres should be entrusted solely to fully trained operators. Only proven regrooving tools with electrically heated blades should be used. Our TruckForce network partner are enable to regroove Goodyear tyres.
Regrooving is the practice of carving out the rubber in the grooves of a tyre to create additional tread depth.
Our guidelines for regrooving can be downloaded from our knowledge center.
Retreading is the process of applying a new tread on used tyre casings.
Regrooving is the practice of carving out the rubber in the grooves of a tyre to create additional tread depth.
The main reason for retreading is to reduce waste, thereby reducing the impact a business has on the environment. Increasingly, customers demand that their suppliers demonstrate best practices in sustainability, so retreading also reassures customers. Retreads also substantially reduce operating costs, delivering similar performance to new tyres but at a lower cost.
Tyres can be retreaded several times. Retreading the tyres depends on the activity of the fleet and the management model. If you want your tyres to have multiple life, consider the factors that influence wear:
These are two methods of retreading. The mold-cure process renews a casing from bead to bead. Unvulcanised rubber is applied to the buffed tyre and it is placed in a mould, exactly as it would be in the manufacture of new tyres. So the retread tyre looks exactly like a new tyre: only the naming on the sidewalls will indicate that the tire has been retreaded.
The pre-cure process (also known as ‘cold-cure’) involves applying a new pre-moulded, pre-vulcanised tread to the casing. It is bonded to the casing by means of a thin layer of specially compounded uncured rubber (known as cushion or bonding gum) which, when vulcanized, acts as an adhesive.
Goodyear tyres are retreaded under TreadMax and Next Tread brands.
Please directly contact us to get details on our pre-cure offer.
Like retreading, regrooving extends the life of the tyres, while reducing the costs.
Regroove Goodyear truck tyres when there is still enough tread depth. Under NO circumstances should the tyre be completely worn before regrooving. Suggested remaining tread depths are: 3-4 mm for regular highway use; 5-6 mm in operating conditions where penetration damage is likely.
The regrooving of truck tyres should be entrusted solely to fully trained operators. Only proven regrooving tools with electrically heated blades should be used. Our TruckForce network partner are enable to regroove Goodyear tyres.
Regrooving is the practice of carving out the rubber in the grooves of a tyre to create additional tread depth.
Our guidelines for regrooving can be downloaded from our knowledge center.
Use our dealer finder tool to find a certified Goodyear dealer in your area
Whether you are looking for more mileage, better fuel economy or fewer breakdowns, we have a number of proven tyre management solutions that can help. Start by taking a look at the three below.
